A Binder Chain should be rated equal to the chain

A Binder Chain is a chain used in lashing heavy cargo down on trucks or low loaders. These chains have a minimum breaking force of 60 tonnes for 22mm and are made from high quality alloy steel and finished with black lacquer. They are easily identifiable by their manufacturer identification number. They can be purchased from industrial wire rope. When choosing a Binder Chain, ensure that it meets your exact needs and specifications. The following are some important considerations to consider when choosing a chain.

When selecting a Binder Chain, make sure that the rating of the Binder and the chain are the same. For example, a grade 70 transport chain must be paired with a grade 70 binder, or the binder may be inferior to the chain. If this is not done, it could compromise the protection of the load. If the binder is not properly rated, it will only make the setup a weakened link.

A Binder Chain should be rated equal to the chain. For example, a grade 70 transport chain must be paired with a grade 70 binder. Otherwise, the binder would be the weakest link in the setup, compromising the load's safety. If the chain is not rated correctly, it will be useless. Besides, a Binder Chain should be installed with care. There are many types of Binder Chains available.

When choosing a Binder Chain, be sure to find one that matches the load. If you are using a Grade 70 transport chain, you should use a grade 70 binder. If you use a grade 70 tie-down chain, it will be the weakest link in your setup, and it might compromise the protection of your load. This is essential in the event of an accident. The right type of Binder Chain will help you achieve the best results.

Lever Chains are easier to install. They can be installed with ease. However, they require more strength to tighten. Some types have cheater bars, which can be dangerous. The best binder chain for your specific needs is the one that meets your specifications. You can find many specifications of chain binders in the Industrial Wire Rope catalog. In addition to the measurements, you should also determine the grade of your chain. Depending on the grade, a Grade 70 binder may not be suitable for your particular application.

The Binder Chain has two types: a ratchet and a lever. The Lever chain binder is easier to install, while the Cheater Chain is tougher. The former uses leverage to tighten the chain, while the latter uses a lever. Both types of binders are available in the Industrial Wire Rope catalog. It is important to check the specifications of both the ratchet to ensure that you are buying the right one for your specific application.